Home > Shower Questions from Visitors > RE: Bathtub Shower Door

RE: Bathtub Shower Door

Hello, I’m trying to install tub shower door. When I put in the inside panel the bottom part touches the bottom bumper but on the top there is a two gap. I tried adjusting the rolling wheels but nothing workings. I’m thinking of either cutting the wall jamb on the side of the gap or put something on the other wall jamb to raise it a little higher.  If you could please advice on what I should do ? Thank you for your help.

tub-enclosure

Hi Francisco,

The problem you are having is caused by a bathtub that is way out-of-level, or a wall that is way out-of-plumb. In order to give you the correct advice, I would need to know if it is one or both of these issues.

If you are unable to get the sliding panels to line up with the wall jambs properly, and are thinking of leveling out the header by cutting one jamb, or shimming the other one up a bit, there are a couple of things to think about. If you cut one of the jambs, and you cut it too short, the corner of the door will hit the sill when it slides to the short side. If you shim the other jamb up, you run the risk of the panel coming out of the guide when it slides to the tall side…

The proper way to address this is to use an insert under the sill or behind the jamb (between the jamb and the tile). First you need to find out which you are going to need… Is the wall leaning out-of-plumb two inches? If so, you will need an insert for that jamb. The manufacturer of the enclosure will be able to provide one of these for you. It is a length of aluminum that is the same overall height of the one that came in your kit, but will be wider at the top (or bottom) as needed to correct the outage. If the outage is at the bottom (the tub), the same approach can be taken… the manufacturer can supply a length of aluminum that will fit between the tub and the sill of the enclosure.

Let me know if this is helpful,

Chris Phillips
Showcase Shower Door Company

Advertisements
  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: